Projects

Fuel Storage Tank Internal Lining

Internal tank lining projects require controlled preparation, careful access and coating discipline because the completed system supports the continued performance of storage infrastructure.

Specialist works delivered in a live infrastructure setting

Removal of existing failed lining and application of new tank lining system to semi buried Aviation Fuel storage tank. Old lining was removed via abrasive blasting the entire floor and 1m up the shell wall. Floor was prepared to SA2.5 and a new lining system was applied.
Client

Aviation Fuel Depot

Service Provided

Fuel storage tank internal lining; internal protective coating works; tank lining renewal.

Main Image
Project gallery

Images from the Fuel Storage Tank Internal Lining works

A closer look at the working environment, access arrangements and completed asset condition.

Case studies

More project case studies

Explore other examples of protective coatings, tank lining, pipe crossing works, rail access and infrastructure maintenance delivered by W.G. Beaumont.

Shalford Pipe Crossing

SGN & THAMES WATER

Shalford Pipe Crossing
Located over the River Wey, Shalford, the pipe bridge supports 1no 12” IP Gas Main and 2no 12” Water Mains. Due to the location of the bridge, access was only possible via pontoon.
Brunel Bridge Pipe Crossing

Cadent Gas

Brunel Bridge Rail Crossing
Essential maintenance painting works to a 240 metre, 12 inch low pressure Cadent Gas main attached to Network Rail infrastructure in Windsor, including the listed Brunel Bridge over the River Thames. Works also included pipe support upgrades and support for gas main repairs.
timelapseltd.co.uk-52

Cadent Gas

Twelvetrees Crescent Pipe Crossing
Maintenance painting and anti-climb measure installation to two 48 inch Cadent medium pressure gas mains spanning approximately 100 metres over Bow Creek and the River Lea at Twelvetrees Crescent.
Project enquiries

Have a similar asset, crossing or coating project?

Send the details to W. G. Beaumont for review, including asset location, access constraints and any coating or lining specification available.